AUGER BITS > MAG 303DLX
303 DLX HEAVY DUTY SHIP HEAD AUGERS
18" OAL x 15" Twist Length
SIZE
MM
SHANK
SIZE
PART
NUMBER
UPC NO.
722170
3/8"
10
5/16"
303DLX.0616
30301
7/16"
11
5/16"
303DLX.0716
30302
1/2"
13
5/16"
303DLX.0816
30303
9/16"
14
5/16"
303DLX.0916
30304
5/8"
16
7/16"
303DLX.1016
30305
11/16"
17
7/16"
303DLX.1116
30306
3/4"
19
7/16"
303DLX.1216
30307
13/16"
21
7/16"
303DLX.1316
30308
7/8"
22
7/16"
303DLX.1416
30309
15/16"
24
7/16"
303DLX.1516
30310
1"
25
7/16"
303DLX.1616
30311
1-1/8"
29
7/16"
303DLX.1816
30312
1-1/4"
32
7/16"
303DLX.2016
30313
1-3/8"
35
7/16"
303DLX.2216
30314
1-1/2"
38
7/16"
303DLX.2416
30315
UNIT PACK: 1

The Nailbomber
Molybdenum coated for
cooler running
Cuts nails
Manufactured from higher grade steel
Glides through wood with less binding, bores faster
Ejects chips faster
Stays sharper longer
No run out, machined on
a true center

Molybdenum Coated:
Molybdenum cools and
lubricates the bit. The bit stays sharper longer because the heat treatment lasts longer.
The bit ejects chips and bores faster than ordinary bits and binds less, even in wet or resinous woods.
Deeper Lands: For a stronger less flexible bit.
Countershark: Bits 5/8” and larger in diameter will
accept the Mag-Bit counter
bore tools, available in
1-1/2”, 2-1/4” and 3-1/4” diameters.
Extensions: Two recesses on shank to receive extension set screws.








Products are shown at a reduced size and are not proportional to each other
© 2004 Mag-Bit