 
SPECIALTY BITS > MAG 780
780 BELL HANGER DRILLS
AVAILABLE IN 12", 18" 24" & 30" OVERALL LENGTH
SIZE |
SHANK
SIZE |
MM |
PART
NUMBER |
UPC NO.
722170 |
| 3/16" x 12" |
3/16" rnd |
5 |
780.12.0316 |
78030 |
| 1/4" x 12" |
1/4" rnd |
6 |
780.12.0416 |
78001 |
| 5/16" x 12" |
5/16" rnd |
8 |
780.12.0516 |
78002 |
| 3/8" x 12" |
3/8" rnd |
10 |
780.12.0616 |
78003 |
| 7/16" x 12" |
7/16" rnd |
11 |
780.12.0716 |
78015 |
| 1/2" x 12" |
1/2" rnd |
13 |
780.12.0816 |
78016 |
| 9/16" x 12" |
9/16" rnd |
14 |
780.12.0916 |
78017 |
| 5/8" x 12" |
5/8" rnd |
16 |
780.12.1016 |
78018 |
| 11/16" x 12" |
11/16" rnd |
17 |
780.12.1116 |
78019 |
| 3/4" x 12" |
3/4" rnd |
19 |
780.12.1216 |
78020 |
| 3/16" x 18" |
3/16" rnd |
5 |
780.18.0316 |
78004 |
| 1/4" x 18" |
1/4" rnd |
6 |
780.18.0416 |
78005 |
| 5/16" x 18" |
5/16" rnd |
8 |
780.18.0516 |
78006 |
| 3/8" x 18" |
3/8" rnd |
10 |
780.18.0616 |
78007 |
| 7/16" x 18" |
7/16" rnd |
11 |
780.18.0716 |
78021 |
| 1/2" x 18" |
1/2" rnd |
13 |
780.18.0816 |
78008 |
| 9/16" x 18" |
9/16" rnd |
14 |
780.18.0916 |
78022 |
| 5/8" x 18" |
5/8" rnd |
16 |
780.18.1016 |
78023 |
| 11/16" x 18" |
11/16" rnd |
17 |
780.18.1116 |
78024 |
| 3/4" x 18" |
3/4" rnd |
19 |
780.18.1216 |
78025 |
| 13/16" x 18" |
13/16" rnd |
21 |
780.18.1316 |
78026 |
| 7/8" x 18" |
7/8" rnd |
22 |
780.18.1416 |
78027 |
| 15/16" x 18" |
15/16" rnd |
24 |
780.18.1516 |
78028 |
| 1" x 18" |
1" rnd |
25 |
780.18.1616 |
78029 |
| 1/4" x 24" |
1/4" rnd |
6 |
780.24.0416 |
78009 |
| 5/16" x 24" |
5/16" rnd |
8 |
780.24.0516 |
78010 |
| 3/8" x 24" |
3/8" rnd |
10 |
780.24.0616 |
78011 |
| 1/2" x 24" |
1/2" rnd |
13 |
780.24.0816 |
78012 |
| 1/4" x 30" |
1/4" rnd |
6 |
780.30.0416 |
78013 |
| 3/8" x 30" |
3/8" rnd |
10 |
780.30.0616 |
78014 |
|
|
 |
High carbon steel |
|
Fish eye hole for
pulling wire |
|
Packaged / Bulk program available |
High carbon steel drills for boring wood and fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling.
Two recesses in shank to allow for extension set screws (bits 5/8" and over). Refer to page 20 for appropriate extensions.
|
|
