 
SPECIALTY BITS > MAG 909
909 SHARK BITS
9" OAL X 6" Twist Length
SIZE |
MM |
PART
NUMBER |
UPC NO.
722170 |
| 9/16" |
14 |
909.0916 |
90902 |
| 11/16" |
17 |
909.1116 |
90903 |
| 13/16" |
21 |
909.1316 |
90904 |
UNIT PACK: 1
SPECIALTY BITS > MAG 909
909 COUNTER SHARK
SIZE |
MM |
PART
NUMBER |
UPC NO.
722170 |
| 1-1/2" |
38 |
909.2416 |
90910 |
| 2-1/4" |
57 |
909.3616 |
90911 |
| 3-1/4" |
83 |
909.5216 |
90912 |
UNIT PACK: 1
  
SPECIALTY BITS > MAG 909 KIT 1
2 Piece Kit - Packaged in a Clear Plastic Clamshell
KIT
NUMBER |
KIT
PARTS |
PART
SIZE |
MM |
UPC NO.
722170 |
| 909.KIT1 |
909.1116 |
11/16" |
17 |
90921 |
|
909.3616 |
2-1/4" |
57 |
|
SPECIALTY BITS > MAG 909 KIT 2
4 Piece Kit - Packaged in a Clear Plastic Clamshell
KIT
NUMBER |
KIT
PARTS |
PART
SIZE |
MM |
UPC NO.
722170 |
| 909.KIT2 |
909.0916 |
9/16" |
14 |
90922 |
|
909.1116 |
11/16" |
17 |
|
|
909.1316 |
13/16" |
21 |
|
|
909.3616 |
2-1/4" |
57 |
|
SPECIALTY BITS > MAG 909 KIT 3
3 Piece Kit - Packaged in a Clear Plastic Clamshell
KIT
NUMBER |
KIT
PARTS |
PART
SIZE |
MM |
UPC NO.
722170 |
| 909.KIT3 |
909..2416 |
1-1/2" |
38 |
90923 |
|
909.3616 |
2-1/4" |
57 |
|
|
909.5216 |
3-1/4" |
83 |
|
|
|
 |
Shark-Bits available in 9/16", 11/16" and 13/16" diameters. |
|
Makes more holes in Glue Lam Joists and other
engineered wood products than auger bits. |
|
High Speed Steel will drill through steel (use Mag-Lube cutting fluid). |
|
Packed in a reusable stor- age tube |
Designed to work with
MAG-BIT’s Countershark counter-bore tool, these 9" bits have a flat on one side of the shaft to accommodate the set screw on the Countershark.
|
Counter-bore for use in all types of wood. |
|
Use with Mag-Bit Shark bit or MAG303DLX, 357DLX, 735, 715 and 710 auger bits 5/8” diameter or larger to drill clearance holes for bolts and countersink the head and washer in one action. |
|
Securely attaches to bit with a heavy duty set screw. |
|
Six super sharp teeth on the outer diameter cut a clean hole and leave a smooth finish at the bottom of the workpiece. |
|
Packaged in a clear plastic clamshell |
Designed to work with
MAG-BIT’s Countershark counter-bore tool, these 9" bits have a flat on one side of the shaft to accommodate the set screw on the Countershark.
 |
|
